SCHEDA TECNICA

Se hai bisogno di un aiuto a valutare quale sia la miglior versione adatta alle tue esigenze, non esitare a contattarci.

Richiedi un preventivo per:
ARCHITETTURA BIM STUDIO PROFESSIONAL
Muri, Porte, Finestre, Strutture, Vetrate, Solai, Scale, Tetti, Travature, Balaustre, Oggetti 3D parametrici.
Gestione Piani ed Edifici
Roombook, Vani e Zone
Gestione Immagini Overlay-Raster (formati di immagine più comuni)
Calibrazione grafica e per distanza / coordinate
Terreno 3D, Sbancamenti, Carte Tematiche, Integrazione Google Maps
DOCFA, Riquadri e Poligoni
Modellazione libera 3D (Solidi booleani)
Rilievo Architettonico -
Trasformazione prospettica foto, Vettorializzazione -
INTERIOR DESIGN
Oggetti 3D, Sprite, Silouette
Gestione fonti luminose artificiali
Modellatore 3D Telai, Parti, Assiemi
Room - Maker -
Posa piastrelle 3D, fasce e decorazioni. -
Configuratore Parametrico KBB -
Configuratori (Porte / Finestre / Mobili) -
Oggetti 3D da Fotografia -
Quadri, Tende, Tovaglie, -
Apparecchiature Elettriche -
Superfici Membrane Gravitazionali -
Mood Board -
DOCUMENTAZIONE
Funzioni CAD-2D avanzato
Quote, Annotazioni, Testi
Sezioni e Prospetti Automatici
Liste: XLS, RTF, Grafiche, Abachi, Variabili di costo
Tavola di Sovrapposizione (Gialli e Rossi)
STAMPA
Tavole di Stampa
Stampa PDF, PDF/A-1b, PDF/A-1/a
VISUALIZZAZIONE E RENDERING
DirectX 11 2D/3D, Walk&Fly, Ombre Tecniche
Compatibile con: THEA Render, Artlantis, 3D Studio, Cinema 4D
Rendering fotorealistico (Ray Tracing, Global Illumination,..)
Inserimento fotografico 3D con procedure analitiche e dinamiche
Virtual Staging: simulazione fotografica di interni
Panorama 360° -
Percorsi d'animazione, film in formato AVI, animazione Quick-Time -
Animazione Ombre, Tempi di costruzione -
COMPATIBILITA'
Windows 7,8,10, Mac(Emulazione)
Chiave di protezione USB di tipo LAN, con possibilità di attivare l'uso contemporaneo di più postazioni all'interno dello stesso ufficio -
IMPORT / EXPORT
Formati file 3D: 3DS, SKP, OBJ, ATL, C4D, VRML, DAE
Google Warehouse
Autodesk DWG, DXF, RVT, RFA
PDF, BMP, TIFF, JPEG, PNG
IFC v2x3 Certificato Building Smart
Google Earth KMZ
BIMObject – Download diretto modelli RFA -

Servizi

Assistenza Tecnica Telefonica
Assistenza via e-mail
Assistenza con collegamento desktop remoto
Corsi Multimediali
Workshop formativi
Corsi Online

ARCHLINE.XP RELEASE NOTES

Di seguito viene riportato lo storico delle attività di sviluppo, raggruppato per numero di build pubblicate.

ARCHLINE - RELEASE NOTES

ARCHLine.XP 2018 Build 752 | 2018.12.03

2018.11.30. - Build 752
----------------------------------------------------------------------------------------------------------------------------------
- Improve Google Maps Integration
- IFC Export: Placing objects with smarter file sizes and higher speeds
- IFC export: accelerating 3d generation
- IFC export: accelerate import by accelerating element creation
- By improving the 3D rotation center calculation, the model begins to rotate around the clicked point in 3D
- Clicking on the corner of the placed raster image can be resized
- List barriers in the xml output
- Burning buildings, levels, GUID in the xml output
- Add property export command in case of roof window
- Write extra calculated data for the roof into xml and IFC export
- Handling BIM parameters for buildings and levels
- Information, Move, 2D Edit, Activate Toolbars in Ribbon Mode. They are basically switched off

Bug fix:
- Objects with too long texture names have lost texture files.
- IFC import: consideration of the level structure after slab import
- Fixing the Entry in the Furniture Parts dialog box
- Improve partitioning of partial 3D generation of objects
- Project changing dialog crash fix
- Manage styles of apparent materials
- Door Wizard Error Correction: On the door panel, the texture on the rear side was upside down.
- Fixing in dimensioning dialog
- Room-book: NORM-I the net area was incorrectly calculated
- Improve profile toolbar management dialog
- E57 import crash fix
- Improvement of housing excel list lift
- When removing the door openings on the wall, the wall in the other room did not restore the wall
- Correcting incorrect information messages with dwg export
- Stairway drag and drop could have escaped from the Object Center
- Correct handling of the roof-to-roof connection material
- Work plane is not exported to dwg
- To improve IFC export to the Scada program
- Improvements to T and Cross profiles
- Improve the 2D demotion error between section windows

- Mantis 0006159 - crash during loading project
- Mantis 0006161 - Importing empty ifc file from Revit application output can cause crash in archline
- Mantis 0006162 - Surveyed room text style is not changeable
- Mantis 0006163 - Delete part sticker command is not working on some elements, like led lighting or sweep
- Mantis 0006164 - Archline.XP 2018 build619 icon assignments are wrong
- Mantis 0006166 - ID15895: miss some elements in print view
- Mantis 0006167 - ID15989 - Roof view
- Mantis 0006179 - Importing IFCPlate elements to the program result in IfcBuildingElementProxy elements when re-exporting
- Mantis 0006177 - Room-book: error in area under roof calculation
- Mantis 0006174 - Ticket16554_Problem with IFC import
- Mantis 0006172 - ID15009: Problem with IFC import
- Mantis 0006122 - ID15105 - Room and Area consignation
- Mantis 0006104 - ID14424 - Graphics problem (2) with 4K resulotion
- Mantis 0006138 - ID15443: layer entities_hight

----------------------------------------------------------------------------------------------------------------------------------
2018.09.17. - Build 670
----------------------------------------------------------------------------------------------------------------------------------
- Priorities of Elements given in the floorplan keep the same priority in the 3D Views – and after copying the vector 3D view in a 2D Window as well.
- Roof, Slab: The roof / slab with 3 points definition has changed. The top or bottom surface as reference point must be set only once at the beginning of the command, then followed by the input altitudes. New message: „The vertical distance above the reference point refers to the lowest (YES) / highest (NO) point of the flat roof or slab.”
- Corpus marker points on corners: Executes the Change width/height command directly (restored the Build 509 state).
- Corpus on wall: False coordinates in placement 3D. Fixed.
- Wall: The representation of wall hatches is changing from “course” to “medium” opening the Floor-Dialog. Fixed.
- Option menu / User Interface / Window arrangement: Picture in Picture mode is cancelled
- IFC: Breaks / recesses in the column / beam are exported into IFC properly.
- IFC: Import error fixed. Missing storey information with objects from Revit IFC
- IFC Export Degenerated solid of stair body may cause crash. Fixed.
- Door/Window: Parametric door/window handle placement improved
- Window: Round window may cause crash. Fixed.
- Freeform surface: Material change command in Property panel did not work. Fixed.
- Truss height error is fixed.
- Truss command moved to Roof submenu
- Terrain – New input file format: Ascii (.asc) data to create 3D terrain
- Terrain – Text enlargement command reorganized and executes in loop to set up the proper text height quickly.
- Point Cloud: Clipping from Top and Clipping from Bottom commands are separated. Mouse right click or ENTER terminates the command and executes the clipping.
- New command in Point cloud menu: Refresh Floorplan to update the point cloud view on floorplan after clipping
- Profile dialog error: profile resizing with incorrect width-height values could be loaded into the profile dialog
- Fix the crash if the ARCHLine server did not respond within reasonable time

ARCHLine.XP 2018 Build 619 | 2018.07.23

ARCHline.XP 2018 Release notes
----------------------------------------------------------------------------------------------------------------------------------
2018.07.16. - Build 612
----------------------------------------------------------------------------------------------------------------------------------
- Generate 2d asymmetrically split windows with 3 wings and introducing New Australian Windows.
- Decrease the default frame size for Louvre windows
- Ifc import sets are "dragged" to the elements as well
- 3D Warehouse link management
- Property export command works Ifc after importing well for the doors and windows
- New accelerator key customization menu features added, up to now fixed.

Bug fix:
- Australians: When saving a project, other data was saved from the offsets in the structure of a single building level than in hmap.
Hmap wins in such cases after scanning.
- Mantis 0006153: Walls get styles of windows if no-style is set
- Inventory name errors ifc at import, system dialog xml command do not specify the auxiliary ifc objects that are not shown in the drawing
- Ifc export error: In 2018, object export never worked (which does not light up)

----------------------------------------------------------------------------------------------------------------------------------
2018.07.11. - Build 600
----------------------------------------------------------------------------------------------------------------------------------
- Add new acceleration keys to profiles
- Customize New Accelerator Buttons dialog, currently hidden (Customize User Interface -> SHIFT + Open in Browser).
- 3D Warehouse downloads prevent unsuccessful import by filtering invalid characters from the file name
- Australian windows with macros (windows / awning and windows / louver in DC)
- DC: drag & drop images to 60x60 in order not to mask the drawing


Bug fix:
- Error correction (extracting double glazing where not needed) There was file and dccategory xml.
- Remove an unneeded update from an integrated render
- Roof window placement could only be restored in 2 steps.
- Nicola: the release version do not waste
- Roof Area and Numbering info was placed in the same position and could not be read. If both are switched on and there is a collision
between them, move the newly placed so that always the sequence number is down.
- Korean ARCHlineXP Error list build 569
- Pdf error correction - Hatch error in the extra line
- Mantis 0006158 - Underlay floor plan on 3d view command should work from 2d window: ID15288
- Marco:Project GUID generation.
- Repairing windows - use "rota" instead of "hop" and instead of up to 45 degrees to 90 -> This way the opening can be
adjusted from the Toolbox as well.

----------------------------------------------------------------------------------------------------------------------------------
2018.07.06. - Build 583
----------------------------------------------------------------------------------------------------------------------------------
- 3D Warehouse download link changed
- Component generator for generating curved walls with frontal profile
- Wallscreen: We also show the panelling
- New command: Create terrain by points
- Roof information texts work with the same set of texts
- In slab dialog always shows the layers
- In the key combinations menu, the "copy to clipboard" button has been replaced by "open to browser".
- Edit the contour of a region when placing a wall view.
- Define new acceleration keys
- 3D cursor test below Dx11 can cover itself.
- Managing Approx Edges during a 3D cursor

Bug fix:
- 3dwarehouse download works if there are accented characters in the name of the object.
If the name of the object could not be extracted from the source of the page.
- For 3D Cursor instances, it did not remove the original solid
- Registration window error correction
- Improved 3D cursor waste managementa
- Slab removal of walls / columns (bottom) remained inside the 3D undo.
- Mantis 0006152 - Ledlighting and Luminous text texture is not correct in render, when lighting is switched off (ID15691)
- Ribbon user toolbar customize crash fix

----------------------------------------------------------------------------------------------------------------------------------
2018.06.28. - Build 560
----------------------------------------------------------------------------------------------------------------------------------
- 3D camera development
- Left mouse button rotation
- Right mouse button rotation works in axonometry
- Fast rotating sticker icon positioned on the circle
- Adding Generic Attributes from the newly created elements in the last undo step: for architectural elements (group only)
and for 2d drawing elements that are not in an array of architectural elements.
- Windows 10 (and higher) should only be dx11 double buffering
- Archive Preservation Increases the period from weeks 2 to 4 weeks (valid for new installations)
- In case of a project save, retention of a file older than 1 day has been canceled by renaming. Instead, 3 archives per day.
- 3D cursor: When moving the 3D body, the original body is hidden. When copying, the original 3D body remains.


Bug fix:
- Load-bearing wall errors: need to generate the doors and windows and node commands works
- Print: Pen width
- Fix the EditBox size on the 4K resolution Tooltip screen.

----------------------------------------------------------------------------------------------------------------------------------
2018.06.19. - Build 548
----------------------------------------------------------------------------------------------------------------------------------
- Curtain wall (corner window) developments: In the 2D display, we hide the elements that make up the contour of the glass
  the edges cut off by the contours of the vertical dividers
- Curtain wall (corner window) developments: Generate a frame in 3D for curved sloping walls: The path of the frame on the
surface of the glass (the surface curve of the glass surface).
- BirdEye command
- Display camera on floor plan in READER version
- Camera control:
- can change levels by moving.
- show on layout: when the camera is outside the window, it is visible on the layout.
(in this case, moving the move the viewpoint where the camera is drawn to the floor plan.)
- integrated render synchronization
- Plot layout update accelerate
- Consider frame as a limit when moving the nodes
- Ribbon search bar optimization
- Icon-based sticker on the beam to rotate the profile
- Object, corpus, column stickers modification in 2d and 3d
- Drawing Comparison: Elements on the non-visible layer are also removed from the comparison
- Catalog page size increase icon - two sizes are 90 * 90 and 120 * 120. The old 60 * 60 deleted.
- Accessory rotation and moving stickers transformation modification
- Tile Printing: Draw a border in the preview
- Generating a missing property set in the roof dialog
- Korean character coding development
- Detect printing problems around Ricoh's printers drivers
- New design: Pink user interface

Bug fix:
- Objects in the latest models and favorites have not always been included with light source objects
- Column dialog set crash
- IFC export with wrong GUID
- Teigha crash fix for further usage
- Returning stair loop did not handle the case when one side of the staircase does not exist at all
- Korean character coding
- Fixing measurement units in roof list (CZ)
- Character coding problems in inventory and object name dialog history stored in registry
- Terrain: any elements that may have been created and the 3d can be generated from them. Do not stay on invisible layer.
- DirectX 11 graphic driver issue
- Mantis 0006151 - Roombook: New Room-catalog
- Mantis 0006131 - Polar array - number of copies
- Mantis 0006142 - Projected roof dialog error when choosing from the predefined 9 types of roof in Korean and Greek version
- Mantis 0006146 - You can't type a custom pen width value in pen-color assignment dialog
- Mantis 0006147 - ID15552 - DWF export

ARCHLine.XP 2018 Build 509 | 2018.05.28

ARCHline.XP 2018 Release notes
----------------------------------------------------------------------------------------------------------------------------------
2018.05.23. - Build 509
----------------------------------------------------------------------------------------------------------------------------------
- Curtain Wall - Editing on layout. Editable parts: Mullions, Frame edges, Frame nodes.
- Ribbon bar: New tabs on Edit Panel: Selection and Tools
- Ribbon bar menu additional commands:
Edit / Move / Move with shift and Rotate
Edit / Duplicate / Duplicate with shift and Rotate
Dimension / Building / Triangulation
- Sketch Mode bug fix: Sketch Mode tab disabled status error is fixed
- Room Maker: New editable feature: Distance from wall line
- New editable marker for Door / window: Distance from wall line
- Excel quantity take-off / List by manufacturers extended: Door / window/ object
- Create excel output with frontal view of doors/windows
- Properties dialogs: Elevation inputs displays the calculated value instead of the parametric value.
Parametric values are visible only on second level layer details dialog.
- SKP output: sorted by layers
- When placing a wall view, the wall numbering text is also printed under the wall.
- 3D Warehouse update - the download protokoll has changed by 3D Warehouse, ARCHLine.XP 2018 is updated.
- Place toolbar text command extension: 3D and section views can be fetched and placed

Bug fix:
- Ifc export extended with "LoadBearing" property
- character encoding errors (utf8)
- Material management works on special charactered languages
- Hand-sketch style only in 2D
- Crash: Create wall in set mode; Ceiling dialog; Beam profile selection dialog
- Custom Ribbon menu crash
- Excel list: fixed image size (door/windows)
- Roof dialog: enable/disable layer display in 3D
- Universal dialog crash: 3D calling
- 3D Group pop menu crash
- 3dwarehouse crash
- In a 3D database, an incorrect value
- On the print page, when the architectural scale has changed, the 3D generation must be turned off, because otherwise Keyword not allowed
in this context is infinite message flow.
- Pop menu: switch off/on light sources of the object, lighting text, led strip

----------------------------------------------------------------------------------------------------------------------------------
2018.05.09. - Build 459
----------------------------------------------------------------------------------------------------------------------------------

Bug fix:
- Reversing the intersection viewing direction
- Render: download backgrounds with special character filename (example:é,á,ő,ú,ű,ú,ó)

----------------------------------------------------------------------------------------------------------------------------------
2018.05.04. - Build 449
----------------------------------------------------------------------------------------------------------------------------------
- The curtain wall editing command is extended with 2 developments, that makes much easier the precise integration of a door/window
into the glass wall portal:
1. When you place a door into the partial curtain wall (some parts remained real wall) the collision
detection is only a warning, but the program lets you place the new door/window.

2. Edit curtain wall on layout command highly improved. You can manage mullions (move, move in group,
insert new, delete) and the frame in all components. Move command distance can be measured from both sides
with Next reference point command.

- Vector 3D windows accelerate 3D generation
- Load accessories relative height from saved sets
- When loading an accessory kit, compulsory duplication of the general parameters


Bug fix:
- Mantis H0006125 - Xml export command by ID always exports all room books and some unwanted element types which reduces speed
- Improve snap options level management
- Print Error Correction: Do not ask for a file name for a physical printer
- PDF print: possibility to print as a PDF without any external add on

----------------------------------------------------------------------------------------------------------------------------------
2018.05.04. - Build 441
----------------------------------------------------------------------------------------------------------------------------------
- Change distance of door's and window's stickers from the wall
- Door / Window Conversion allows you to delete the original object: if it is not used elsewhere in the drawing!
- Ribbon menu: new control bar Status Bar and there are two new menus the Selection Menu and the Reference Point menu
to enable to assign acceleration keys to the commands


Bug fix:
- Mantis H0005859 - Hatch : AutoCAD style hatch patterns preview error in the pattern dialog
- Moving of dormer window undo command and drawing command error
- Mantis H0006071: Ticket 13159 - Plot layout missing information from image

----------------------------------------------------------------------------------------------------------------------------------
2018.04.06. - Build 421
----------------------------------------------------------------------------------------------------------------------------------

- Loft profile with rotating sticker
- ARCHline Reader Ribbon menu
- Rom maker: possibility to add the doors and windows distance from the wall

Bug fix:
- Corpus non-horizontal shelves did not always come up because they did not succeed in identifying the face needed to create a contour
- Panorama (directX command) crashes
- IFC import crash

----------------------------------------------------------------------------------------------------------------------------------
2018.04.27. - Build 410
----------------------------------------------------------------------------------------------------------------------------------

- T and L connection separated
- Dialog development
- Pipe element and wire were eliminated
- Animation of the floor plan window is optimized for zooming
- Excel file reading without any BIM parameters
- Ribbon menu expansion: : Dimension Aligned 3D, Dimension Length 3D, Sketch Mode
- Object Dialog: Improve Parametric Macros Management
Retention of relative height when replacing an obejct
- Missing excel database files protection and avoidance of the crash
- Avoiding crash when making a property grid preview
- Local group name can be changed in property grid for single selection
- Drag and drop pop menu separator
- Dormer window development: window handles
- Beam profile with rotating stickers in 2d and 3d

Bug fix:
- Property grid: doors and windows preview crash
- Texture slipping error
- 3D animation camera error
- Print line error
- Mantis H0006119 - Change material - As painting
- 3D export crash

----------------------------------------------------------------------------------------------------------------------------------
2018.04.10. - Build 397
----------------------------------------------------------------------------------------------------------------------------------

- Creating new sets of dialogs creates property sets
- Field commands precision
- Point cloud cut at Z-directional
- Ribbon menu: Clipboard_Submenu icons are clearly separated from Undo/Redo icons

Bug fix:
- Dialog size error
- Render: character encoding error
- Snap options: Universal dialog -> Change the relative height of accessories
- Generation of the terrain crash
- Property grid (beams and rooms): the relative height reseted after the multi select
- Property grid (railing): the relative height reseted after layer changing
- Drag and drop development
- Set import: copy textures did not happen in all cases
- Disabling the visibility of inactive buildings did not work because the dialog changed the old value saved
- When placing a drawing on a sheet of paper, inactive buildings are lagging behind because the cut of the detail did not follow them

----------------------------------------------------------------------------------------------------------------------------------
2018.04.06. - Build 386
----------------------------------------------------------------------------------------------------------------------------------
- Restoring the environment will also restore the layer settings
- Render: If Sunlight is not activated, portals are ignored
- Niche command has been added to the Menu bar

Bug fix:
- Mantis 0006118, ID14960 - Door from photo creation
- Mantis 0006096: ID14280 - Terrain resolution
- Improve the redrawing of the scalability of a doors&windows
- 2D in 3D. Improving Drawing Error. There were also room book texts that were turned off
- Portal Generation Error
----------------------------------------------------------------------------------------------------------------------------------
2018.04.04. - Build 384
----------------------------------------------------------------------------------------------------------------------------------
- Ifc import: Time and Calendar date

Bug fix:
- Fixed bug of light color in rendering when using surface lights
- Mantis 0006117 (DWG import PL)

----------------------------------------------------------------------------------------------------------------------------------
2018.03.30. - Build 379
----------------------------------------------------------------------------------------------------------------------------------
- Environment Export/Import: possibility to export/import company sets and local sets
- Instead of permanently deleting a complete directory, program will only move it to a Trash when using environment import/export command
- Fix bug of hiding ToolTip when moving a mouse away from an item
- Rotation: If you do not find a point of rotation at a given point, then the center point is calculated from the point of entry when selecting.
- systemdialog xml command includes elements that came from ifc import (not native building elements)
Bug fix:
- Mantis 0006116 - ID14812 (The upside-down of the bottom of the stairs is not performed at the degree at which degrees
to the previous and subsequent degrees are parallel to each other.)

- Doors&Windows: 3D mirror sticker was on wrong place
- Drawing of LED strip and loft with 3D path on a 2D window did not work
- Mantis 0005703 - Corner Window Preview: It appeared to have a common profile for both walls.
- Custom Style Pack could not be turned off with the blank field

----------------------------------------------------------------------------------------------------------------------------------
2018.03.28. - Build 376
----------------------------------------------------------------------------------------------------------------------------------
- Improve environment import/export command with saving and loading styles
- 2D window: when there is a selection of any element the keyboard directional buttons move the selection by 100 mm in each direction
- Reset environment to defaults at settings dialog

----------------------------------------------------------------------------------------------------------------------------------
2018.03.27. - Build 375
----------------------------------------------------------------------------------------------------------------------------------
- Property grid: import command for styles
- Property grid: you can find the source of the set in a pop up hint window
- Transforming part of the Polyline into an arc
- Icon of move command has changed

----------------------------------------------------------------------------------------------------------------------------------
2018.03.26. - Build 374
----------------------------------------------------------------------------------------------------------------------------------
- Option to delete the layers when savig My set
- Displaying the calculated height and relative height in Property Grid, even if they are based on parametric definitions
Bug fix:
- Improve Korean language & characters
- Parametric door and window 2D drawing fix
- Mantis 0006107

----------------------------------------------------------------------------------------------------------------------------------
2018.03.05. - Build 373
----------------------------------------------------------------------------------------------------------------------------------
- Icon replacement in property dialog
- Elevation symbol placement: object, electrical accessory sub menus and subcommands removed
- Alphabetical listing in Property Grid styles list
- Changing styles from Property Grid did not always apply the correct relative height settings

----------------------------------------------------------------------------------------------------------------------------------
2018.03.22. - Build 372
----------------------------------------------------------------------------------------------------------------------------------
- IES lights import: If there was no valid Lumen value, the default setting should be 1500 Lm
Bug fix:
- Ifc import: importing terrain sets the layer correctly
- Changing ballustrade relative height from dialog
- Fix file size issue of pdf printing

----------------------------------------------------------------------------------------------------------------------------------
2018.03.20. - Build 369
----------------------------------------------------------------------------------------------------------------------------------
- Removing pr$ file mechanism
- PDF printing: saving with a filename of an existing file will ask for permission

Bug fix:
- Property Grid bg fix when ARCHLine.XP was run with 3 displays
- Fix in project navigator: not cutting the end of text
- Mantis 6113 - ID14638 - Import from BIM object (warning message about unsupported file types)
- Improve Loading User ToolBar. Handling non-user commands icons in ribbon mode
- Fixes in project milestones dialog

----------------------------------------------------------------------------------------------------------------------------------
2018.03.15. - Build 365
----------------------------------------------------------------------------------------------------------------------------------
Bug fix:
- Correcting Korean characters (Property Dlg, Toolbar)
- Showroom multiple download bug fix
- systemdialog xml command exports only architectural elements by default (skipping 2d elements by default)

----------------------------------------------------------------------------------------------------------------------------------
2018.03.13. - Build 363
----------------------------------------------------------------------------------------------------------------------------------
- Ifc Export: fixed mapped geometry bug
- Ifc Import: Adjust the level offsets. Import parameters were not loaded in all cases
Fixed crash if there was no IFCPROJECT present in the input file

----------------------------------------------------------------------------------------------------------------------------------
2018.03.12. - Build 360
----------------------------------------------------------------------------------------------------------------------------------
- Ifc Export: Introducing mapped geometry for same type of objects. Results in smaller file size, faster import into other applications.
- Fixed bug of renaming Layer groups

----------------------------------------------------------------------------------------------------------------------------------
2018.03.09. - Build 355
----------------------------------------------------------------------------------------------------------------------------------
- Fixed ifc export crash
- Printing also works if there is no physical printer connected to the PC
- Possibility of displaying stair at the level above

----------------------------------------------------------------------------------------------------------------------------------
2018.03.08. - Build 352
----------------------------------------------------------------------------------------------------------------------------------
- Ribbon menu, Property grid, Design Center handles special national characters
- Accelerate processing of point clouds

----------------------------------------------------------------------------------------------------------------------------------
2018.03.07. - Build 349
----------------------------------------------------------------------------------------------------------------------------------
- Doors&Windows: In case of symbolic 2D representation of the bridle, the size of the symbol can be either the saved size or proportional.

----------------------------------------------------------------------------------------------------------------------------------
2018.03.06. - Build 348
----------------------------------------------------------------------------------------------------------------------------------
- Furniture front and body location dialog. loft orientation does not change after marker commands
- Editing mode: the door, window creation lead to the same command

Bug fix:
- Render do not create a new user under c:\Users\
- Beam and wall hanger snap options fixes

----------------------------------------------------------------------------------------------------------------------------------
2018.03.05. - Build 346
----------------------------------------------------------------------------------------------------------------------------------
- Editing mode:
- New object:
if the object is already exist -> warning message that the dimensions of the new object maybe different

----------------------------------------------------------------------------------------------------------------------------------
2018.03.05. - Build 345
----------------------------------------------------------------------------------------------------------------------------------
- Wall, ceiling 3d sticker commands observe snap options
- Can the previous day's save automatically be set in the Options - Open and Save panel
- Editing mode, close, warning message that the dimensions of the new object may differ

Bug fix:
- Correction of Z-directional sliding error in wall cover
- Roombook: saving backup supplies

----------------------------------------------------------------------------------------------------------------------------------
2018.03.02. - Build 344
----------------------------------------------------------------------------------------------------------------------------------
- Walk & Fly commands in navibar
- Newly created layers are visible as default

Bug fix:
- Improve an integrated render

----------------------------------------------------------------------------------------------------------------------------------
2018.03.01. - Build 342
----------------------------------------------------------------------------------------------------------------------------------
- Ribbon Profile: xml extends the .nanguage extension (eg .hu; .ger). Thus, profiles can be selected as linguists
- Wall height change with 3d sticker. note the snapoption
- Wall vertical work plan command dialog
- Property grid: missing polyline preview

Bug fix:
- fixing the loop in options dialog + json output correction (level structure)
- offset repair in pg for stock switching
- offset fix in property grid for multiple element types at the same time for modification and then for type sucking.
- Speed correction definition error

----------------------------------------------------------------------------------------------------------------------------------
2018.02.28. - Build 340
----------------------------------------------------------------------------------------------------------------------------------
- At the end of Environment import warning to restart the program
- Pop menu: changing the wiring height of the lamp
- The size of the joining height of the wall lamps is really the size of the joining height, not the relative height
- Synchronize classic menu with Ribbon bar
- Dxf-Dwg import error: the dimensioning value is always indicated (# sign in the format).
- Ribbon User Menu negative icons (global icon from table to address)
- Changing the Wall Dialog Snapoptions:
If there are multiple layers and none of them are parameterized, you can also pass the values in the main dialog.
  The principle is the same as last year: if the layer heights are the same, then each layer changes to the same height.
  If they are not the same, then (as we always write the data of Layer 0 to the surface), we modify the other layers by
relative modification to layer 0. So we do not make the same height. The basic height of all layers is modified, keeping
the differences relative to each other
- Displaying explanatory diagrams for objects in the object dialog

Bug fix:
- Property Grid: the inventory list did not take the program into the closed groups
- Property Grid: in the layer control list, the new button is pressed and leaving the dialog disappears the layer of the element
- Integrated render error
- Pop-up character encoding error
- Level snapshot command window to launch 3D: Draw Loss trouble
- Set: the right click action is activated to update the list
- Design center: Drag & Drop do not corrupt the lastcommand
- IFC & RFA import import do not duplicate imports
- Style relocation

----------------------------------------------------------------------------------------------------------------------------------
2018.02.26. - Build 330
----------------------------------------------------------------------------------------------------------------------------------
- Fly & walk animation - Ribbonmenü, Toolbox, Map_menu
- When placing the clipboard content on the current 3D work plane, the architectural elements are divided into drawing elements
- Database verification has been added in Option / User Interface - Check Database


Bug fix:
- Creating a new door from an object, if you do not have the 2D element you are referring to, then crash
- Ribbon: property menu
- Slab dialog snap options parameters


----------------------------------------------------------------------------------------------------------------------------------
2018.02.23. - Build 326
----------------------------------------------------------------------------------------------------------------------------------
- You can modify the global style in the set dialog
- Ribbon: Luminous text properties command
- You can also adjust the alignment of jibs to a staircase when defining an option set.
- Staircase Fitting: You must calculate the altitude of the stairs in advance, as the values returned by the rest disables (ramp) change.
- Property Grid single modify mod: open the object property dialog
- In the door & windows dimension dialog, you do not need to turn on the dimension assignment to set the dimension data
- Handrail arms 3D generation: too short bends (<1cm) at the beginning and end of the chain are omitted to avoid creating distorted bodies
- Placing a door or window in a 3D Window: aligning the side of the window with the selected wall as a starting point

Bug fix:
- Luminous text

----------------------------------------------------------------------------------------------------------------------------------
2018.02.21. - Build 323
----------------------------------------------------------------------------------------------------------------------------------
- Ribbon Menu: Work plane display
- Considering the working plane when calculating the cutting planes
- Ribbon Menu: missing attributes right click command entry, replace icon for bigger icon
- Work plane: add new icons - tracking classic menu

----------------------------------------------------------------------------------------------------------------------------------
2018.02.20. - Build 322
----------------------------------------------------------------------------------------------------------------------------------
- New command: propery import & export
- Staircase Fitting: You must calculate the altitude of the stairs in advance, as the values
​​returned by the rest disconnected (ramp) change.

----------------------------------------------------------------------------------------------------------------------------------
2018.02.19. - Build 320
----------------------------------------------------------------------------------------------------------------------------------

Bug fix:
- Point catch in a 3D window: the distance of the point's distance from the cursor point and the distance of the point from the
viewpoint by changing its priority

----------------------------------------------------------------------------------------------------------------------------------
2018.02.16. - Build 319
----------------------------------------------------------------------------------------------------------------------------------
Preview dimensions in Property Grid

Bug fix:
- VR and level scaling symbols are dosen't mixed

----------------------------------------------------------------------------------------------------------------------------------
2018.02.14. - Build 317
----------------------------------------------------------------------------------------------------------------------------------
- Multiple lamps can be found at Ribbon Menu
- If there is something wrong with the walled walls, then let the other elements be released in 3D.

Bug fix:
- IFC export and at the end on export display the characters
- Picture, Ballparam, GlassWall layer settings

----------------------------------------------------------------------------------------------------------------------------------
2018.02.14. - Build 316
----------------------------------------------------------------------------------------------------------------------------------
- Doors&Windows: Displays the bridle in 2D.
- Project and drawing scans take on the layer names defined in the global set

Bug fix:
- Scaling inventory
- Layer set import
- Layer activation
- json import
- View/ User Interface resource
- Property Grid

----------------------------------------------------------------------------------------------------------------------------------
2018.02.13. - Build 314
----------------------------------------------------------------------------------------------------------------------------------
- The section is separated by the 3D window and the new name is 3D section box. The intersection command always enters the 2D window.
- Ribbon menu: User Interface group at the end of the View menu, right click on the blank area counter.
- Basic Style Change in 2018:
- The weaknesses of the Styles so far were the layer that could not be used in one language
from a single set of transparencies. This is a big problem because it causes the inventory to be
used only in the given language. The English name given to the style must now only be placed in
the appropriate Translat File. Of course, if you are reading an old project, it will bring the layers
used there, but the new elements created with the styles will be generated on the new standard layers
The new project will start with the same layer set in all languages. On the first page, I select the item type.
Then, the style tab will appear, from which I can start the creation command with any style.
It speeds up the work many times.

- Monolithic suspended ceilings and lamp groups: Extending the cutout so that the lamps can be lowered completely
- Staircase Fitting: If you have a 180 degree reversal on the railing track, you will always have a break point

Bug fix:

- Fix Toolbar Commands: Displays everything and + resets to default
- For a U-shaped staircase with a width of 0, it could not be assigned a handrail on this page since joining a straight line disappeared the armrest path

----------------------------------------------------------------------------------------------------------------------------------
2018.02.12. - Build 313
----------------------------------------------------------------------------------------------------------------------------------
- lamp groups: switch off light sources in the dialog + Property Grid on its own panel
- Picture on the wall setmode do not call Property Grid dialog, it calls own dialog
- Categorization(alias set rename) commad at Proprety Grid
- Styles left menu - right click on the Copy to Template: Project command
- Set import: Layers
- Loadinf global sets modification


Bug fix:
- Column, beam length modification stick
- The ceiling above the staircase was broken in the case of a U-shaped staircase with a span width of 0.
The previous procedure could not be improved to this end.
The new procedure:
- The contour of the stairs has to be recalled without any simplification because the simplification
eliminated the inside of the U-shaped part because of the coincidence..
- You should also return to the contour of the staircase the steps to which curves of each contour of the contour.
- With the help of the former, you can identify the location of a step on the stairway contour.

---------------------------------------------------------------------------------------------------------------------------------
2018.02.09. - Build 311
----------------------------------------------------------------------------------------------------------------------------------
- After DWG import accelerated zoom
- 3dtext: do not ask for the thickness of the font
- Picture at the wall at a new image option to retain the previous dimensions
- Editing a profile You can change the circle radius of a circle keyword
- 1169 deleted and replaced by 1599 common resource: Do you want to keep the previously set dimensions?
- If Grid Snap is On:
- The cursor sketches the location of the selected grid point.
- The direction we use when entering a value is not gravitated at this time.
- First, it must be drawn to the grid point, then the fixed line.

- Uj fix skálázó parancsok:
- Interfész Utf8 alapon.
- Property setek olvashato formaban mentese a setekhez
- kép a falon kezelés a pg setlista kapcsán

Bug fix:
- Font settings
- Sets searching

----------------------------------------------------------------------------------------------------------------------------------
2018.02.08. - Build 308
----------------------------------------------------------------------------------------------------------------------------------

- Property Grid: flickering, image stretching, caching, preview window instead of imagebutton not to accidentally get a mouse event
- Property Grid: set preview can decide whether to make 2d or 3d content
- When you open Sketch mode, the 3D window will be active and magnified
- Ribbon menu: Depending on the language version, remove commands from the ribbon menu
- Property Grid preview: tracing of window, door set change
- Automatic coupling of walls:
- Verify that the specified wall is already connected. If so, we will not let you change it.
- If the selected end of the wall is already connected to others with a wall, then the new
wall can only be connected by T.
- Failed to link to the selected wall, then look at the list of walls because it might be another wall.

Bug fix:
- Inserting new material after insertion error
- Set of stairs dialog
- Door, Window Property Grid do not crash at drafting
- Drawing a set: 2D window
- Sliding-wrist door:
- If the number of wings on one side was more than 6, he placed a lot more in open position.
- Right wing wings were defective in open position.
- The pivot point of the lamellas should be half the lamellas thickness before the back of the frame.

- Property Grid: line scale, callattributedialog return value, delete the preview
- item type conversion class repair

----------------------------------------------------------------------------------------------------------------------------------
2018.02.07. - Build 306
----------------------------------------------------------------------------------------------------------------------------------

- Roof kit preview in Property Grid
- 3D column, beam with marker length modification command, relative displacement can now be
given + new marker: beam 3D absolute length
- Simplified wall kit Property Grid preview - No reference plane and plus slab
- Cover ribbon icon has received the cover stylus placement command
- In the case of a sliding-wedge door, the pivot point of the blades should be half the blade thickness at the rear of the frame

Bug fix:

- Improving Drawing Update Error: Certain indices are out of memory due to memory addressing.
- Fine shadow improvement

----------------------------------------------------------------------------------------------------------------------------------
2018.02.06. - Build 305
----------------------------------------------------------------------------------------------------------------------------------

- 2D stair editing command got new marker with two commands:
1. Enter the group
2. Replacing a symbolic representation
- 2D stair editing information dialog change to can be disabled
- Gazebo roof is hexagonal default
- Removing your favorite lists always update the list view window
- Ribbon bar: Collapsed View also works with Tree Controller
- Update drawing comparison: If the project can not be found either in the original (stored) or in the draw directory,
then look at the current project / drawing directory.
- Placing a door/windowd in a 3D window: Like the 2D placement, you can place the door with the outside side
- When placing the door/window, the placement side text (external or internal) is printed with the cursor


Bug fix:
- Second monitor crash
- Crash report: download syncronia cause crash
- Improved scanning of the environment


----------------------------------------------------------------------------------------------------------------------------------
2018.02.05. - Build 304
----------------------------------------------------------------------------------------------------------------------------------
- Prevent style crash if there isn't Project Navigator
- Property Grid: preview of walls in inventory


Bug fix:

- Pointcloud: point catch repair


----------------------------------------------------------------------------------------------------------------------------------
2018.02.02. - Build 303
----------------------------------------------------------------------------------------------------------------------------------

Bug fix:

- In a barrier, if the height parameters of one of the puppets do not match those in the definition, the place of the base
of the puppet should not be moved to an existing piece of wood because it places it at this height at the beginning, and if
its top is not aligned with anything, then the top will go to another height

- Expansion of sets

----------------------------------------------------------------------------------------------------------------------------------
2018.02.01. - Build 302
----------------------------------------------------------------------------------------------------------------------------------

Graphic features: Camera light 240 Daylight 30

Bug fix:

- Resizing a corner window, only the width of the portion in the selected wall should be the starting size.

----------------------------------------------------------------------------------------------------------------------------------
2018.01.31. - Build 297
----------------------------------------------------------------------------------------------------------------------------------

Bug fix:
- corner window resizing error on 2d with cursor or makers fixed

----------------------------------------------------------------------------------------------------------------------------------
2018.01.30. - Build 291
----------------------------------------------------------------------------------------------------------------------------------

- Default Values changes: Camera Light 240, Daylight 30
- Environment import is possible from drag and drop
- Right-click menu in the property grid for the styles: commands: activate and copy from project to my directory

Bug fix:
- Mantis 6091: Ticket ID14182 - Name of view
- Shadow simulation dialog resize error

----------------------------------------------------------------------------------------------------------------------------------
2018.01.29. - Build 289
----------------------------------------------------------------------------------------------------------------------------------
- Handling tiling styles in Property grid
Bug fix:
- Exporting environment packages from design center

----------------------------------------------------------------------------------------------------------------------------------
2018.01.26. - Build 288
----------------------------------------------------------------------------------------------------------------------------------

- Glasswall(curtainwall) handling at property grid
- Wall by Frontal Profile splits to two commands:
1. Specified on the current workbook.
2. Enter the work plane first, then specify the wall


- Workplane setter command automatically switches to a 3D window
- Door / window dimensioning command is split into Door dimensioning, and Window dimensioning commands


----------------------------------------------------------------------------------------------------------------------------------
2018.01.25. - Build 287
----------------------------------------------------------------------------------------------------------------------------------

- Drawing Comparison Dialog: introducing settings with buildings and floors
Bug fix:
- The dotted effect did not work well in every situation in furniture assembly elements

Bug fix:
- Interpretation error at section windows from older projects
- Project Navigator: Renaming Function improvement


----------------------------------------------------------------------------------------------------------------------------------
2018.01.24. - Build 286
----------------------------------------------------------------------------------------------------------------------------------

Bug fix:
- fix of handling texture coordinates at some cases
----------------------------------------------------------------------------------------------------------------------------------
2018.01.23. - Build 285
----------------------------------------------------------------------------------------------------------------------------------

- Property grid pencil button functionality changed
Bug fix:
- Bugs in Property Grid with Accessory item type

----------------------------------------------------------------------------------------------------------------------------------
2018.01.22. - Build 279
----------------------------------------------------------------------------------------------------------------------------------

- Ramp dialog shows stairs in preview as a ramp

----------------------------------------------------------------------------------------------------------------------------------
2018.01.19. - Build 272
----------------------------------------------------------------------------------------------------------------------------------

- Limiting the number of dotted lines segmented - 2018 raised to 300
- Stair 2D display with custom symbol: use an analog solution with a roof
- Property grid: when starting item creation commands, the listview shows all the avilable styles and it's possible to change style during the command

----------------------------------------------------------------------------------------------------------------------------------
2018.01.18. - Build 260
----------------------------------------------------------------------------------------------------------------------------------

- Moving heliodon shows shadow effects in realtime on model

----------------------------------------------------------------------------------------------------------------------------------

2018.01.17. - Build 258
----------------------------------------------------------------------------------------------------------------------------------

Bug fix:
- Fine shadow in case of a panorama background
- IFC import crash fix rac_advanced_sample_project.ifc
- Restoring sun stickers: azimuth, zenith stickers to set the Sun to custom position

----------------------------------------------------------------------------------------------------------------------------------
2018.01.16. - Build 257
----------------------------------------------------------------------------------------------------------------------------------

- Korean version Plus Minus sign

Bug fix:
- Status Bar: Day and Draw Lists Swap Buttons. Reset error correction
- Crash fixed in about dialog (in case of high memory usage)

----------------------------------------------------------------------------------------------------------------------------------
2018.01.15. - Build 256
----------------------------------------------------------------------------------------------------------------------------------

- New OpenCollada version (1.6.61)
- Lamps 'dimmable' parameter default value changed to true.

Bug fix:
- Icon render crash
- Improve the appearance of texts ListCtrlAdvanced BrowseBox


----------------------------------------------------------------------------------------------------------------------------------
2018.01.12. Build 255
----------------------------------------------------------------------------------------------------------------------------------

- Creating Pre-defined Form Roofs. Command: #roof #default.

Bug fix:
- IFC import crash fixed
- Fix of crashes when calling stair structure dialog from Property grid (in case of large memory usage)
- Fix of crashes when callingAwning and parasol dialog (in case of large memory usage)
- Fix of crashes when calling Color settingsdialog (in case of large memory usage)
- Syncronia object library download fix at Italian language environment

----------------------------------------------------------------------------------------------------------------------------------
2018.01.11 - Build 254
----------------------------------------------------------------------------------------------------------------------------------

- A list of drawings is also included in the status bar.
Layer control width reduced to 70%
- Disabling superfluous toolbars on a Ribbon interface
- Options dialog - a possibilty to save styles to 'My' category.

Bug fix:
- Mantis 6089 - Ticket ID14125 Neon light 1 does not work after rendering
- 360 degrees is converted to 0 degree error
- Length-size fixes: Factory, English, Hungarian, Italian


----------------------------------------------------------------------------------------------------------------------------------
2018.01.10.Build 253
----------------------------------------------------------------------------------------------------------------------------------

- Sun and shadow settings are available on status bar
- Led lighting copy properties command works
- Existing object resave in sketch mode works
- Collada import gives object names based on information coming from model instead of file name

----------------------------------------------------------------------------------------------------------------------------------
2018.01.09 - Build 249
----------------------------------------------------------------------------------------------------------------------------------

- For Pdf import, select imported items and optimize the optimal zoom
- New roof types in the Classic menu
- Curtain Wall created with profile can be edited by markers later
- Option dialog (removed settings):
Project Navigator is integrated, Cycle through overlapping object, Toolbox right ckick Mode
- New Move scale commands 1:10, 1: 100 etc with predefined scales
- 3D Warehouse as a very commonly used command has been moved to the Interior menu to the first level
- 3D rotation, mirroring commands: in the arrow stickers menu
- Syncronia and Cadenas object libraries improvement

----------------------------------------------------------------------------------------------------------------------------------
2018.01.08. - Build 247
----------------------------------------------------------------------------------------------------------------------------------

Bug fix:
- A bug in the toolbox in the tooltips of the submenus
- Elevation views in project navigator: alphabetic ordered list in the project navigator.
for older projects, positioning should be closer to the model when elevation symbols are created automatically

----------------------------------------------------------------------------------------------------------------------------------
2018.01.04. - Build 246
----------------------------------------------------------------------------------------------------------------------------------

Bug fix:
- Fixed mixed up module codes from module number 9
- Fixed possible crashes in list views in case of high memory usage

----------------------------------------------------------------------------------------------------------------------------------
2018.01.03 - Build 245
----------------------------------------------------------------------------------------------------------------------------------
Bug fix:
- Fixed crash at projected roof creation

----------------------------------------------------------------------------------------------------------------------------------
2017.12.25 - Build 238
----------------------------------------------------------------------------------------------------------------------------------
Bug fix:
- fixed crash in Property grid with terrain attributes
----------------------------------------------------------------------------------------------------------------------------------
2017.12.22 - Build 237
----------------------------------------------------------------------------------------------------------------------------------

- New outdoor shading dialog with 3D preview
- 3D rotation, mirroring commands in 3D on arrow stickers

----------------------------------------------------------------------------------------------------------------------------------
2017.12.21 - Build 236
----------------------------------------------------------------------------------------------------------------------------------
- Converting objects to original position when entering sketch mode(save without rotation and tilt)

Bug fix:
- Door-window sketch mode will not loose textures on solids

----------------------------------------------------------------------------------------------------------------------------------
2017.12.20. - Build 235
----------------------------------------------------------------------------------------------------------------------------------

- Calculate and store the complexity parameter for user made items (not just after importing)
- Wall in 3D with a front view profile places the wall in front of the selected
plane regardless of the reference line location.
- Sketch mode closure will not automatically place the new item as well


Bug fix:
- Database error correction in project navigator for forefront drawings

----------------------------------------------------------------------------------------------------------------------------------
2017.12.19. - Build 232
----------------------------------------------------------------------------------------------------------------------------------

- Wall Beam: replication is allowed also at internal studs.

----------------------------------------------------------------------------------------------------------------------------------
2017.12.18. - Build 228
----------------------------------------------------------------------------------------------------------------------------------

- Loft items 2D representation development when direction is vertical
- Possibility to insert to plot layout using 1:25 scale factor

----------------------------------------------------------------- 2018 -------------------------------------------------------------

ARCHLine.XP 2017 Build 478 Release 1 | 2017.12.07

Bug Fix:

  • Fix of representation errors after deleting elements in 2D window.
  • Correction of inner database error when opening xref-s with walls.
  • Avoiding crash when importing newer version dwg or dxf file than Archline could read. Introducing error message.
  • Saving layer sets into My does not work
  • DWG export crash bug fix
  • VGA card version detection is disabled due to stability issues on multi VGA card systems, usually notebooks
  • Fix of ID13528_open polyline_medium
  • Saving objects into project with national characters in their names
  • Character encoding error fixes in excel lists and in dialogs
  • Accelerating the launch of the software
  • Work in individual bars was allways disabled
  • IFC export - copy and paste any element to multiple than export cause IFC fault
  • Bim parameters export to  excel list (sorted by name)
  • Area measure error: measurement multiple more areas calculated wrong sum value.
  • modify the layout of plot layout, disappear some parts of the project:  missing the lines of the terrain and some lines of the perimeter
  • IFC import as object may lose the 3D geometry and BIM parameters
  • OBJ file import may crash if contains a texture void reference
  • Layer issue with .asc mode. The default template override the .asc draw settings.
  • Ifc export - Columns/beam with mirrored profile export resulted wrong 3D shift transformation.
  • Floor names are deleted if a new one is added under or over an existing floor.(ITC)
  • Second monitor possible crash.
  • DWG layout: XREF content is imported properly
  • Cursor box displays the X,Y coordinates properly
  • Modify style in Column dialog may crash.
  • If you changed the Base offset from the floor at the Column/bea properties dialog ARCHline crashed
  • The icon of the Rename command (at working window) disappeared

 New functions:

  • Groupwork developments:
    • Roombook: calculates with elements of other members in the group
    • Plot layout: drag and drop places elements of other members in the group
  • Import project from other users:
    • Before the import we save the actual project (without any question).
      After the import, without any question we load the imported project with the activated previous user.
      After the successful import the project has been saved.
  • Possibility to change the owner of elements in selection.
  • The backup files hidden flag is deleted.
  • New option from Polyline command  - Close
  • DIN standard step height adjustable global setting has become 2m so far you can not set the default setting.
  • In the section setting, the barrier is not considered an object (do not apply the skip object checkbox)
  • Accessory (curtains, furniture elements, led tapes, etc.) bim paramater save to oli
  • Modify virtual stage to make it user friendly
  • We also allow realistic curves (circle, ellipse, parabola) to find the flat surfaces of the general surface.
  • In this case, we always check with the string heights, whether the curve is actually approximated by the halfedge chain.
  • In global settings, under "Coverage", a new checkbox to allow the 2D layout of the cover to be dimmed
  • Can be switched on / off. When turned of it is without background color, only contour lines are drawn.
  • Excel list: For buildings or interiors lists, you can specify which items makes the list
  • Insert node command is extended to circle.
  • Excel list: Excel reports are available for all items and selected items as well.
  • 3D background setting for a new project inherits global setting.
  • DWG Import extended with managing the annotationScale value for dimensions
  • Raster image frame is displayed only when selection by frame is active
  • Scada IFC export: rectangle output uses IFCARBITRARYCLOSEDPROFILEDEF instead of IFCDERIVEDPROFILEDEF
  • dwg import: dwg parameters are converted into BIM parameters
  • Display objects in 2D view as 3D topview has a new control in Property Grid
  • Italian version: Switch off the Making backups older than 1 day function
  • Sketchup import : improved visibility of edges
  • Interface in 4K resolution is improved

ARCHLine.XP 2017 Build 334 Release 1 | 2017.07.14

  • Bug Fix: Plot layout: some problems in plot layout
  • Bug Fix: Pen width: ARCHline 2017 doesn't keep custom pen width
  • Bug Fix: Wall:in the wall properties is not possible change the color of the wall axis line
  • Bug Fix: Roombook: in summarize comand miss the ratio and surface aeration value
  • Bug Fix: Fixed option distance, angle and relative coordinates
  • Save Background colour of 3d view
  • The area command add the first area with the second area and etc

ARCHLine.XP 2017 Build 323 Release 1 | 2017.06.29

  • RFA import: for door, window, object type import, ARCHLine.XP offers the creation of the door/window, object in the suitable library.
  • Rfa Import: You can specify the arc resolution of the imported items
  • Documentation - Wall elevation view menu is expanded and can be selected from 3 commands: Image, Drawing, and Wall View from all the walls of a room
  • Wall elevation view new representation options: Hidden line, Coloured
  • Length in query dialog represents the architecturally relevant length of architectural / interior design elements.
  • Copy command for big quantities of items are accelerated
  • The Info dialog box is expanded with the list of most memory intensive materials and items, option to search and delete them.
  • Rfa Import: You can specify the arc resolution of the imported items
  • Making backups older than 1 day. The new feature supports those who works on only one project for long time and does not save his work otherwise. In order not to accidentally delete the single copy of the project, backup will be automatically created when the last saved file is older than one day, adding the date of the last saving to the filename. The program overwrites the original file than. When such a backup is created, the program displays it in a dialog.
  • Loft: The 2D representation options has been expanded with the polyline path representation
  • Corpus dimensioning commands are placed in a separate sub-menu called "Corpus" in the Dimension group. New Corpus command: Quote All Sizes
  • Importing SKP, OBJ, 3DS the software displays a new warning message if total number of surfaces exceed 50000.
  • Quantity take-off in Excel calculates the items on visible and not visible layers either.

ARCHLine.XP 2017 Build 277 Release 1 | 2017.05.08

  • The user defined materials description file (.mtr) are saved into the archive folder (once a day)
  • Roof Window Placement: If you switch to a free placement (instead of the parapet height constrain),  the command is repeated for the next roow window placement.
  • When you download an object from Showroom and 3DWarehouse this object can be found in the recently used objects list in Desing Center
  • Panorama DX basis: Create a panorama from background and the background of the gradient
  • You can specify Elevation Wall View as a drawing, just like an image. The Documentation - Wall Elevation View menu includes 3 commands: Image, Drawing and series of drawing in a room.
  • Wall elevation view - Room by Walls: With this command you can create in one step the whole Wall Elevation views from a room.
  • Bug fix: Roombook - Area calculation: Double area calculation of the added and removed areas.
  • Bug fix: Hidden Line shaded and shadow.
  • Bug fix: Doors and windows resize (2D) - the cursor shows the width of the doors and windows leaf, but the value entered was interpreted as a change.
  • Bug fix: The explode command did not work for table text and multiline text
  • Bug fix: Print Layout - Hidden elements were included in the enclosing box
  • Bug fix: Opening a Project with lot of user defined line type symbols takes too long time.

ARCHLine.XP 2017 Build 239 Release 1 | 2017.04.25

  • Direct Revit RFA, RVT import: ARCHLine.XP 2017 users can import and view of the RVT, RFA files types. After downloading and extracting from .ZIP file you can open the RFA file in ARCHLine.XP (e.g. by simple drag-n-drop) using the menu File > Import > RFA, RVT command.
  • You can convert then the imported items into ARCHLine objects, doors, windows together with the original Revit family BIM parameters.
  • Use the command Manufacture > New object > New object for ARCHLine object conversion and Manufacture > New door > Convert object to door for ARCHLine door conversion.
  • New Rules when you delete a dimension from the chain of dimensions
  •  
    The click point determines what will happen when you delete a dimension.
  • A dimension from the chain of dimensions is deleted by clicking on the first third or last third of a scaling. By clicking on the middle third, the dimensioning location remains blank
  •  
    A small triangular marker will indicate the join beyond the dimension witness line in the direction of the combined dimension.
  • Backup Archives: the delete old archives method is extended, valid for only 2017 release backups, and you can delete manually if the AUTO-ERASE option is in OFF state.
  • Columns and beams embedded into wall can be moved, copied separatelly with marker commands in one step.
  • Language localization support for resellers has changed
  • For Duplicate, Copy / Paste commands, IFC elements that are included in the selection will also be added to the list if they are not already included
  • Bug fix: Roombook (user room seal, summary command, order of magnitude)
  • The menu buttons will find a change in the interface icon size
  • Bug fix: Change the contour of a slab with a break
  • Render: Panorama rendering releases buzzs per post process per camera
  • Roombook - The general color affects the color of the room table
  • Correction of a selection error
  • Improve memory leakage
  • The floor area of the cover was returned to the excel worksheet
  • Bug fix: Error while closing the software
  • The software will indicate all time when the restart needed for any changes
  • Bug fix: Improve freezes while retrieving archive drawing backups
  • DWF import export update
  • Bug fix: Pre-defined roof command
  • When a shared object is withdrawn, the object is withdrawn for all users
  • Bug fix: Ifc import door/window parameters
  • Bug fix: Printing with Bullzip PDF driver: sheet rotation
  • Bug fix: IFC export freezing
  • Realtime Render: The change in the direction of the Sun is followed by the software
  • Bug fix: Change curtains prameters
  • Bug fix: Turning an object into a door in 2D
  • Bug fix: Objective Door Shift did not work with clickBurkolat To display the background area in thickness even in the total area.
  • Bug fix: Improving a curve of a profile's offset, if there were multiple intersections between the two chains, then the two end alignments did not match the same intersection.
  • Changing the deletion period for an archive folder was not followed everywhere (default: two weeks)
  • Bug fix: Shared libraries
  • Bug fix: When importing an IFC element, BIM data losses
  • Load formatting effects 3D
  • Bug fix: Door handle in/out panel enabled

ARCHLine.XP 2017 Build 175 Release 1 | 2017.03.17

  • The furniture sheet artwork contains a drawing of self-contained furniture fronts.
  • Furniture element type is included in the Excel lists and the material is displayed in a separate cell.
  • When saving a snapshot, the default format is Png.
  • If you select a layer from the drop-down menu on the property tab, if you tap a key on the keypad, the program will go to the start-up word.
  • The item info tooltip contains information that the item can not be printed.
  • Development of column markers in 2D and 3D to change height.
  • In the Triangles and Squares subdivision command, the text written on the diagonal will now be based on the text attributes specified in Area Dimension.
  • When DWG import is activated, the hatch limit display is turned off
  • Importing the line type scale factor is not included in DWG import
  • RED Render version change to 4.3
  • For a Column (and a Columned Object), the Wall Positioning Option can be pre-set, stored to the element, and will remain until it is switched off
  • The paper size setting dialog is saved and restored, so you do not have to always manually reset them.
  • In addition to the 3D context menu on the cladding, you will also see the local menu of the erect and architectural item in the list.
  • In case of wall and roof, click on the arrow in 3D, besides the local menu of the window, the list of wall or roof menus also appears in the list.
  • Matt materials have no reflective effect now.
  • For rendering and panorama, the default save folder is the project folder
  • Bug fix: Depending on the furniture front orientation, the thickness of the sheet and the height can be changed depending on the furniture front orientation
  • Bug fix: If the dimension marker line thickness was set to Foil, the dialog box was false when it was re-called.
  • Bug fix: For monolithic suspended ceilings and 3D shape elements, the origin and direction of the texture was different when using the texture when the item was placed elsewhere in the model.
  • Bug fix: In the door wizard, we got off when we changed the wing with two wing doors and changed the right wing data to save the door.
  • Bug fix: In 2017, the layout of the box in the 3D vectorial view was poorly displayed on the print pages of earlier designs.
  • Bug fix: Doors on sliding doors did not appear on 3D models.
  • Bug fix: You can not change the cut-off from 3D windows on printing pages
  • Bug fix: For 3D Form Element Type, the 2D display that can be entered in the dialog did not work well in all cases.
  • Bug fix: For most factory doors, the Tok width width could not be set to 1cm, although the minimum value suggested this.
  • Bug fix: Local groups also work with geometry copy for the same names (scaling too)
  • Bug fix: Refine the edges of the edged frontal profile faces after the bool operation is performed
  • Bug fix: If you entered a stamp seal group, we added a text, and we wanted to transform the text as a parameter, then the text disappeared
  • Bug fix: Polylines that mark the printable area do not appear in the print
  • Bug fix: In a Greek-language program, special characters are not displayed correctly in Property Manager.
  • Bug fix: The paper-size dialog erupted the drawing unit, always changed to mm.
  • Bug fix: While navigating and flying, do not waste resources on the interactive render
  • Bug fix: When using Autocad colors, the RGB values for the colors in the plan are incorrect when you add a color pen
  • Bug fix: For slab properties copying, the layer properties were missing from the layers
  • Bug fix: It was not possible to change the direction of the material of the wall and edges of the workpiece.
  • Bug fix: Improve Objects Replenishment
  • Bug fix: Fix IFC Exports for Rooftops with All Layers Displayed Off in 3D
  • Bug fix: Improve a scratch-off image after opening a project or drawing
  • Bug fix: The favorite list of cross sections of the LED tapes lists the same profiles as the moldings.
  • Bug fix: For object markers in 2D, the height modifier marker can not hang on the movement marker
  • Bug fix: In the 150% DPI setting, more dialogs have deteriorated the content of the favorite lists or the selection did not work properly in the list

ARCHLine.XP 2017 Build 138 (Release Candidate) | 2017.03.02

  • Panorama360 DirectX basis: ARCHLine.XP internal rendering engine gives much faster results than the rendering would be made.
  • The attached IFC elements of the doors and windows could be found at the dialog window of the doors and windows.
  • The wrapped background showing thickened
  • The option to add BIM parameters for materials in dialog
  • Changing icons of the objects in design center will be change the small and the big image at the same time
  • Option to disalbe the contour of the ceiling in print view
  • Ceiling fixtures lining can be placed on the outside of the outer beams
  • Security check over a specific file and model's size in 3DWarehouse dowload site
  • Pillar markers to change the height can be found in both 2D and 3D
  • Allocation of roof tiles on the roof surfaces that do not batten
  • Automatic transfer of the contents of archive libraries to the trash after a specified time period
  • Introduce emissive materials in the rendering
  • To set the visibility of items on the print view in the Tools/Options menu
  • Bug fix: 3d view, wall covering of the room: Automatically update the 3D model with casings
  • Bug fix: Generating of the selected item in 3D will generate the elements of the attached IFC of doors and windows
  • Bug fix: double-clicking on doors and windows come in an amendment dialog
  • Bug fix: the content of the window sections can be placed on the layout from the Project Manager
  • Bug fix: resizing an objects the software changes the geometry of the associated light source to
  • Bug fix: google maps integration is working again
  • Bug fix: IFC exports is included in the material's transparency
  • Bug fix: upon termination of selecting of an elements the side menu is activated
  • Bug fix: repair of damaged oli file caused crash
  • Bug fix: objects become distorted, when the light source is added
  • Bug fix: at lamp group hide only the selected lamp;
  • Bug fix: when using a drawing ceiling the individual elements, breakthroughs are not created automatically
  • Bug fix: style room books can be activated
  • Bug fix: beam cross-sectional profile coercion only joists (E-beam)
  • Bug fix: repair of printing pages placement

ARCHLine.XP 2017 Build 107 (Release Candidate) | 02.02.2017

  • Wall local menu - new commands for placing Tiling or Tiling style in 3D on all walls in a room or on a wall side.
  • Slab - settings for Beams and block flooring system: possiblity to switch on/off the visibility, distance between beams can be set by stickers on the floor-plan, tooltip information about beams and slab clay block (type, number), consignation of beams and slab clay block in the Excel lists.
  • Make 3D dialog - Only the number of surfaces information appears in the dialog.
  • New rendering posibilities: standalone rendering (in a separate application window), integrated rendering (inside a window), integrated rendering - realtime draft, standalone rendering - realtime draft.
  • View menu - Panorama 360 - new commands (place camera, place hotspot between rooms, place info point).
  • Build 3D model dialog: generate layers in wall, slab, roof; create tiles - no option to create tiles without thicness.
  • New available import file format: STL Stereolithography.
  • Snapshot - Windows size option is cancelled because of the possibility of very poor resolution. Instead, the minimum resolution is 1024.
  • At project opening, if the model is far from the origin (> 1 kilometer), a message appears: there is a model placed very far from the origin, It can produce poor rendering quality results, move the objects as close to the origin (0,0) of the drawing as possible, info about distance=....
  • Tiling of slab: with the active or below option you can place the wall contours on the slab layout, by pressing Enter, the layout is placed automatically onto the slab, file menu - Options - Item settings - Tiling: Tiling in 2D on floor or ceiling: place tiling in horizontal case, too.
  • 3D Build model dialog: Enable detailed layers option working for slabs, too.
  • Resolved: 0005975: Group : Create tiling group - category and producer information is not refreshed.
  • Resolved: 0005982: Door : Two handles appear on some doors.
  • Resolved: 0005976: Tiling : Tiling with tiling pattern does not work correctly.
  • SketchUp 2017 compatibility (only in the 64 bit version) (as a consequence, the installer must include MS Visual C++ 2015 redistributable package).
  • Resolved: H005969/0014176 - Wall hatch problem at corner windows.
  • Resolved: H005969/0014153 - Tiling with room wizard did not work.
  • Resolved: H005969/0014155 - Modifying the height/width parameter of an object on the floor plan did not work correctly.
  • Resolved: H005969/0014179 - Tiling in 3D could be wrong if you applied the command in series on different slabs, for example.
  • Resolved: H005969/0014184 - Delete all tiling command crashed in a specific case.
  • H005969/0014159 - Picture on wall - if you modified the size of the picture in the Property tab, the 2D representation did not change, unless you opened the properties dialog of the picture object.
  • H005969/0014159 - 3D menu -> Push / Pull (with profile definition) command did not work on specific object surfaces.
  • Reorganization of project/draw recovery: File menu - Drawing recovery manager.
  • Resolved: 0005912: Window : Mirror handle option does not work for standard handle.
  • Resolved: 0005941: Preferences : Preference settings (template) do not work for Grid.
  • Archive function has changed: instead of .asc files, now the program saves the entire project file into the Archive folder, the first archive saving of the day will not be overwritten, the 2nd and 3rd archive savings will not be overwritten unless at least one hour has passed after the latest saving operation.
  • Import PDF geometry - from now on the program uses the following method for text conversion : draw text as polygons, convert all text to polygons.
  • New development: Slab - Rib and block flooring system dialog is available in the Slab parameters dialog.
  • Room maker bug fix - tiling on floor did not work.
  • Bug fix - Corpus stickers for changing height/with did not work correctly.
  • Resolved: 0005929: Kitchen : Strange lighting appears in a Kitchen object.
  • Resolved: 0005897: Rendering : Light sources are not visible in a monolitic slab on the rendered image.
  • Info toolbar: Query solid (= Tools menu - INfo - List of elements) is cancelled because this command is not used frequently.
  • The command is still available in the main menu.
  • Resolved: 0005871: Object : Downloading Ikea Ranarp from 3D Warehouse - ARCHLine crashes when a 3D Warehouse object includes more than 100 materials, the program informs the user about the number of material included in the object and asks if it should download or not. If not then the object will be saved into the object library with the default material.
  • When you select an element, you can find the floor level information of the element in the Property Grid. Also, you can move or copy objects to other floors from here.
  • Free disk space information is available File - Options - Open and Save - Save autorecover information - Free space now on C:
  • Bug fix: change category of a single element may work differently.
  • BBug fix: ARCHLine crashed when you closed a window with a selected element inside.
  • Design Center - icon change is available even with currently used elements.
  • ITA norm developments are ready for testing. See Marco's request from 04.11.2016 (Roombook essential jobs.pdf).

Il sito web di Cadline Software NON utilizza alcun cookie di profilazione.
Sono invece utilizzati cookie legati alla presenza di plugin di terze parti. Se vuoi saperne di più sull’utilizzo dei cookie nel sito leggi, di seguito, la nostra informativa sull’uso dei cookie.